Question: Does It Matter What Slots I Use For RAM?

What happens if I put RAM in wrong slots?

If you have two sticks of ram and two slots there is no such thing as a “wrong slot”.

If you have 4 memory slots and you put your two sticks in the wrong slot (assuming it boots) then it will just run at lower performance then it could and windows would be oblivious to this..

Does changing RAM slot matter?

Splendid. Depends on motherboard. Some are quite rigorous on which slots are to be used and will not work when ram sticks are put in ‘wrong’ slots. Others just don’t care and will work no matter where you put ram.

Is 3 sticks of RAM better than 2?

Yes, it will add more RAM. Add as many as your motherboard will support. However it would be better to add two with the same total memory as three due to dual channel memory being faster. … 3 x 4gb RAM (12 total) is definitely way better than 2 x 4gb (8 total).

Which RAM slots to use first?

If you are installing memory in a dual-channel memory motherboard, install memory modules in pairs, filling the lowest numbered slots first. For example, if the motherboard has two slots each for channel A and channel B, numbered 0 and 1, fill the slots for channel A slot 0 and channel B slot 0 first.

Is 3 sticks of RAM bad?

To answer your question yes you can use three sticks of ram, however you will not get the maximum performance from it like you will from matched pairs in dual channel. For stability & performance, never mix sets and always configure in dual channel mode.

Is 32gb RAM overkill?

Is 32GB overkill? In general, yes. The only real reason an average user would need 32GB is for future proofing. As far as just simply gaming goes, 16GB is plenty, and really, you can get by just fine with 8GB.

Can I add 4gb and 8gb RAM together?

Usually you can but it depends on the motherboard. There are chips which are 4GB and 8GB, in dual channel mode this will not work. But you would still get 12GB total only a little slower. Sometimes you will have to swap the RAM slots since the detection has bugs.

Can I use 1333mhz and 1600mhz RAM together?

2 Answers. Yes, you can mix 1333 and 1600 MHz RAM sticks, however the system will downclock all RAM to the speed of the slowest stick. For best performance, try and buy RAM that is the same speed or faster.

Is 2 RAM sticks better than 4?

2 sticks is less stress on your memory controller, which means easier overclocking/more stable. so clocks, that u might get stable on 2 sticks may be a nono on 4 sticks.

Do RAM sticks have to match?

For two different size RAM sticks to perform optimally together, they need to use the same voltage and their respective controllers should play well with each other and the motherboard. That’s why it’s best to use the same model in all slots. … So do RAM sticks have to match? No, but it’s better if they do.

Does RAM have to be in first slot?

If you are using SDRAM or single-channel DDR-SDRAM, then it usually doesn’t matter which modules go into which slots. But a few motherboards require that you start with the first slot and fill them in order, so you may as well do it that way.

Can you add 8gb RAM to 4gb?

If you want to add more RAM than that, say, by adding an 8GB module to your 4GB module, it’ll work but the performance of a portion of the 8GB module will be lower. In the end that extra RAM probably won’t be enough to matter (which you can read more about below.)

Do all RAM slots need to be filled?

If it is DDR2 or DDR3 with 4 DIMM slots, then it will be a dual channel configuration, in which there will be no performance difference between having two slots filled vs all four filled, if only two are filled, it is the matter of if the motherboard supports the RAM sticks and the correct slots to fit them into.

Can I put RAM in slots 3 and 4?

If using unbalanced RAM (a 2GB and a 4GB module, for instance) pair up RAM in slots 1 and 3 or 2 and 4. If there is old RAM here and you are going to use it, pair the new RAM correctly. Try not to put three modules in a 4 module slot. It will be less effective.